Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Gun Club Estates
Door installation in Gun Club Estates means one thing more than anywhere else in Palm Beach County: the door has to pass a county wind mitigation inspection. Not a city inspection. A county one, run out of the Building Division, with inspectors covering territory so large that permits and timelines stretch days past what neighbors in Greenacres or Lake Worth are used to. We know that process because we work inside it every week in Gun Club Estates. If you need a new entry door, a storm door, or a full impact-rated replacement, call (954) 280-4413 and we’ll walk you through what the county requires before the first screw comes out.
Why TruePane Windows & Doors Is Gun Club Estates’s Preferred Door Installation Company
Gun Club Estates is a specific place, not a generic Palm Beach County suburb. The homes are mostly concrete block, built from the 1970s through the early 1990s, and a lot of them still carry the original hollow-core entry doors and single-pane aluminum sliders they were built with. Those products predate Hurricane Andrew. They do not meet the Florida Building Code’s wind-load requirements for a Wind-Borne Debris Region with design wind speeds around 140 mph. We have replaced hundreds of those original doors here, and we know exactly what the county inspector will look for before they sign off.
Dale Kessler founded TruePane in 2008 with forty-two years of glazing craft behind him, and the rule on the whiteboard has not changed since: if the pane is not true, the job is not done. That applies to doors as much as glass. Our crews are background-checked and uniformed, the live person answering the phone at (954) 280-4413 is the same at noon or at two in the morning, and the Done Right Promise means if it is not done right, we make it right. No paperwork. No arguing.
We carry both manufacturer warranty layers registered in writing, with durations stated, before the truck leaves your driveway. That is The Keystone Standard. In a community where insurance companies are watching every opening in the building envelope, that paperwork is not a courtesy. It is the difference between a premium cut and a policy cancellation.
Our Door Installation Services in Gun Club Estates
Every door we install in Gun Club Estates is specified for Palm Beach County’s Wind-Borne Debris Region. That is not a upsell. It is the minimum required to pass a wind mitigation re-inspection, and in a community where Citizens Insurance is actively shedding policies, it is the minimum required to keep your coverage. These are the doors we install most often here.
Entry & Swing Doors
The original hollow-core entry doors in Gun Club Estates swell in the humidity. The jamb binds, the deadbolt will not throw without yanking, and the door stops sealing. We replace them with impact-rated fiberglass or steel doors, hung on stainless steel continuous hinges, trimmed with composite brickmold that will not rot in the damp. A typical impact-rated entry door installation in Gun Club Estates runs $2,800 to $5,200, depending on the slab and hardware.

Storm Doors
A storm door alone will not protect your home from hurricane winds, but it adds a layer of UV shielding and airflow control on top of an impact-rated primary door. In Gun Club Estates, where the afternoon sun and salt air punish exterior finishes, a well-built storm door extends the life of the door behind it. Storm door installation typically runs $700 to $1,800 here.

Arched & Custom Doors
Some Gun Club Estates homes were built with arched entryways or non-standard rough openings. We measure every opening twice, order the door to the actual dimensions of the house, and install it true. Custom and arched door work in Gun Club Estates typically runs $3,500 to $8,000, depending on the size, material, and glazing. No stock door gets shimmed and caulked into a non-standard opening on our watch.

Bifold & Folding Doors
Bifold and folding door systems are less common on the older homes here, but they are showing up on remodels and additions. The same wind-load rules apply. We install them with the same Keystone Standard as everything else: both warranty layers registered, durations stated, workmanship guaranteed.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Gun Club Estates
We are an authorized installer for more than a dozen manufacturer lines, and for Gun Club Estates homes we lean on the brands that build specifically for South Florida’s wind and salt profile. PGT and CGI doors are common choices here, and CWS makes an impact-rated door line that performs well on the older concrete block homes in the community. We quote manufacturer lines side by side on paper so you see exactly what you are buying, the warranty duration on each, and the price difference. No vague promises. Call (954) 280-4413 for a free estimate and we will bring the spec sheets to your door.
Common Door Installation Problems We See in Gun Club Estates Homes
- Hollow-core doors warped by humidity. The original entry doors on these 1970s-to-1990s homes absorb moisture and twist. The deadbolt stops aligning, the jamb binds, and the door will not seal against the weatherstrip. Replacement is the fix, not adjustment.
- Salt air corroding hardware within five years. Non-stainless hinges, locksets, and threshold screws rust fast this close to the coast. We specify stainless or marine-grade hardware on every door we install in Gun Club Estates.
- Non-impact doors failing wind mitigation inspections. A door without impact-rated glazing or protection will not pass Palm Beach County’s wind mitigation review. Installing a like-for-like swap means the same insurance problem comes back at re-inspection.
- Seal failure and aluminum frame oxidation on older sliders. The original single-pane aluminum doors lose their seals in the UV and humidity, and the frames oxidize. That is a replacement signal, not a repair signal.
Pricing for Door Installation in Gun Club Estates, FL
A typical impact-rated entry door replacement in Gun Club Estates runs $2,800 to $5,200 installed, including framing, hardware, and trim work. Storm doors run $700 to $1,800. Custom or arched doors run $3,500 to $8,000. Bifold and folding systems run $4,000 and up depending on width and glazing. The price gap between a coastal-spec door and an inland-spec door is real: stainless hardware, impact-rated glazing, composite brickmold, and continuous hinges add roughly $400 to $900 per opening. The inland-spec version fails inside a decade and costs more than that difference to replace. We give written line-item quotes, fixed pricing with no change orders, and free estimates. Call (954) 280-4413 to schedule yours.
Key Takeaways:
- Every door in Gun Club Estates must meet Florida Building Code impact requirements for the Wind-Borne Debris Region.
- County inspectors, not city inspectors, handle door permits here. Timelines run a few days longer than in incorporated cities.
- Impact-rated doors with stainless hardware pass wind mitigation re-inspections and can cut windstorm premiums materially.
- The cost difference between coastal-spec and cheap inland-spec hardware is roughly $400 to $900 per opening, and the cheap version costs more within a decade.
In one Gun Club Estates home off Dorson Way, our crew pulled a hollow-core entry door that had warped so badly in the humidity that the deadbolt would not throw without yanking the jamb. We replaced it with a PGT impact-rated fiberglass door, added a stainless steel continuous hinge, and retrimmed the opening with composite brickmold. The owner’s wind mitigation re-inspection passed the first time, cutting their windstorm premium by over $400 a year. That is not an unusual story here. It is the standard job.
We Also Serve Cities Near Gun Club Estates
Our crews cover Gun Club Estates and the surrounding communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you are in one of those areas and need Door Installation, the same Keystone Standard applies. For this community specifically, our Door Installation in Gun Club Estates page covers the county permit process in detail. The phone number is the same: (954) 280-4413.
Serving Gun Club Estates, FL - Our Local Coverage Area
We’re based in the Gun Club Estates area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Gun Club Estates
Yes. There is no grandfathering a like-for-like swap in Palm Beach County’s Wind-Borne Debris Region. If you are replacing an exterior door slab in Gun Club Estates, the replacement must meet current Florida Building Code impact or protection requirements. That applies whether you touch the frame or not. Call (954) 280-4413 for a free estimate and we will tell you exactly what the county will require for your opening.
Because every permit runs through Palm Beach County’s Building Division, not a city department. County inspectors cover a much larger geographic area than municipal inspectors in Lake Worth or Greenacres, so scheduling an inspection often adds a few days to the job. We build that into our timeline from the start and tell you the inspection date before we begin. Call (954) 280-4413 and we will give you a realistic schedule, not an optimistic one.
Stainless steel and marine-grade hardware last longest. Standard steel or zinc hardware corrodes within five years this close to the coast. We specify stainless hinges, stainless locksets, and composite brickmold on every door we install in Gun Club Estates, and we quote the hardware line on paper so you know exactly what you are paying for. Call (954) 280-4413 to see the spec difference in writing.
No. A storm door is not an impact-rated product and will not satisfy Palm Beach County wind mitigation requirements. It adds UV protection and airflow control, but the primary door behind it must be impact-rated or protected to pass inspection. If your original hollow-core door is still in place, the fix is a full replacement, not a storm door band-aid. Call (954) 280-4413 for a straight answer on what your opening actually needs.
You need a completed wind mitigation inspection form, and the door must be documented with the manufacturer’s impact rating and the installation details. We register both warranty layers in writing, with durations stated, before our truck leaves the driveway. That documentation is what the inspector and your insurance company need to apply the discount. Call (954) 280-4413 and we will walk you through the paperwork step by step.
If you live in Gun Club Estates and your door is original to the house, it is time to look at it honestly. Call TruePane Windows & Doors at (954) 280-4413 for a free estimate. A live person answers. We will measure the opening twice, quote manufacturer lines side by side, and tell you what the county inspector will want to see before the door ever goes in. Done right, in writing, from the first visit.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Gun Club Estates and surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After