Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Franklin Park
Franklin Park homes replaced their windows once in the last sixty years, and most of them need it again. The original jalousie louvered units and single-pane aluminum frames that went into these 1950s through 1970s CBS ranch houses were never built for Hillsborough County’s wind-borne debris region, and today they are flags on every permit inspection. You live in a neighborhood where a window replacement is not cosmetic. It is code compliance, insurance documentation, and the difference between a house that sheds a named storm and one that doesn’t. Our Window Installation crews work Franklin Park regularly, know the block layouts off NW 79th Avenue and NW 8th Street, and quote work to the Florida Building Code the first time. Call (954) 280-4413 and we will measure your openings, walk the permit path with you, and put the numbers on paper.
Why TruePane Windows & Doors Is Franklin Park’s Preferred Window Installation Company
Dale Kessler founded this company in 2008, but the standard behind it goes back many years in the glazing trade. A second-generation glazier does not send a crew to Franklin Park to slap in a window and disappear. We pull the permit, we bring the right impact-rated product for the opening, and we stand behind the install with the Done Right Promise. Franklin Park homeowners call us because they have already been through the other kind of contractor: the one who installed a fogged double pane into an old jalousie jamb and stopped answering the phone.
We are an authorized installer for, ES Windows, and ECO Window Systems, and we quote manufacturer lines side by side on paper so you can see exactly what each dollar buys. Every job includes The Keystone Standard: both warranty layers registered in writing, durations stated, before the truck leaves your driveway. A live person answers our phone 24 hours a day, 7 days a week. If you call from Franklin Park, you get a person who knows Hillsborough County code, not a call center in another state.
Our Window Installation Services in Franklin Park
Franklin Park’s single-story ranch footprint means most homes carry a high window count relative to square footage. That shapes every quote. Here are the window types we install most often in this neighborhood, and what each one means for a CBS home in a wind-borne debris region.
Fixed & Picture Windows
Fixed picture windows are common on the front elevations of Franklin Park ranchers, and they are the simplest opening to bring into compliance. No moving parts means fewer air-infiltration points, but the glass still has to carry the correct design pressure rating for the opening size and its location on the house. A wide fixed unit facing east on a street like NW 79th Avenue takes more wind load than the same size window tucked behind a carport on the west side. We size the glass to the actual opening, not to a generic chart.
Single & Double Hung Windows
Double hung replacements are the most common upgrade path when Franklin Park homeowners pull out old jalousie louvered units. The single hung versions cost less, but the top sash on a single hung is fixed, which changes how the unit vents and how the frame loads under negative wind pressure. For most bedroom openings in this neighborhood, a double hung with impact-rated laminated glass and a reinforced meeting rail is the practical choice. We have installed enough of these on post-1970 ranchers to know which jamb depths fit the existing CBS rough openings without reframing.
Sliding Windows
Sliding windows show up a lot on the side and rear elevations of Franklin Park homes, especially over kitchen counters and in laundry rooms. The original aluminum sliders from this era have thin tracks that bind when the frame settles, and the single-pane glass does not meet current wind-load standards. A new horizontal slider with impact glazing and a stainless-steel roller track works better and passes inspection without a fight. We also address what the old frame left behind: screw holes in the stucco, worn sill flashing, and drainage weep paths that were never cut correctly in the first place.
Awning Windows
Awning windows are a good fit for the low, wide openings you see on some Franklin Park utility rooms and bathrooms. They hinge at the top and open outward, which sheds rain well in a summer downpour. But the hardware takes constant exposure to South Florida heat and salt air, so we specify stainless hardware and a compression seal that does not flatten out after two seasons. If you are replacing a jalousie in a small bath window with an awning unit, we will check the rough opening for the original louver frame’s fastener pattern before ordering anything.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Franklin Park
We are an authorized installer for, ES Windows, and ECO Window Systems, and we carry parts and service knowledge for all three lines. Franklin Park homeowners do not need to wait two weeks for a replacement sash or a warranty claim to route through a regional office. We quote these manufacturer lines side by side on paper, with the rating each product carries for Hillsborough County’s wind-borne debris region, so you can compare a mid-grade impact window against a premium laminated unit without guessing. We also service ViewLux products where they are already installed. If you have a brand we do not authorize, we will tell you that before we quote it.
Common Window Installation Problems We See in Franklin Park Homes
These are the failure modes we walk into most often when a Franklin Park homeowner calls us after a bad install or a failed opening. They are all avoidable, and all of them cost more to fix the second time than to do right the first time.
- Jalousie weather stripping rotted and louver clips broken. The original jalousie design on 1950s CBS homes relies on interlocking glass slats and thin vinyl weather stripping. Once that stripping degrades, the window leaks air and water and cannot meet wind-load requirements. Hillsborough County inspectors will flag surviving jalousies on any window permit, even if you are only replacing a front door.
- New insulated glass set into an old aluminum jamb without addressing frame flex. The original single-pane frames on these ranch homes flex under wind load. A new double-pane IGU glued into that flexing frame fails at the seal within a season or two. You get fogged glass, zero argon fill, and a warranty that does not cover the frame that caused it.
- No flashing tape at the sill on a CBS rough opening. Concrete block does not forgive mistakes. Without proper sill flashing and a back-dam, wind-driven rain gets behind the stucco during the next tropical storm and rots the interior drywall. The window may look fine for six months, then the paint bubbles and you are into a drywall repair and mold remediation on top of the window.
- Non-impact glass quoted as “just as good” because the old windows look fine. Franklin Park is inside the wind-borne debris region. There is no “just as good” option unless you are also installing code-approved shutters or panels, and most homeowners do not want to wrestle hurricane panels at 60 years old. A cheap quote that skips impact glass gets red-tagged at inspection, and then you are paying twice.
Pricing for Window Installation in Franklin Park, FL
A typical impact-rated single hung window installed in Franklin Park runs $850-$1,400 per opening, depending on size, opening count, and whether the existing jamb needs retrofit work. A fixed picture window in a standard front-elevation opening runs $700-$1,100 installed. Sliding windows run $900-$1,500 installed. If you are doing a whole-house jalousie replacement, which is common on the 1950s ranches here, a full project of 12-18 openings typically lands between $14,000 and $26,000 with permit, inspection, and both warranty layers registered in writing. Awning windows for bath or utility openings run $600-$950 installed. The variables are the window count, the rough opening condition, and the design pressure rating the specific opening requires. We quote fixed pricing on paper before any work starts. Call (954) 280-4413 for a free estimate at your Franklin Park home.
We Also Serve Cities Near Franklin Park
Our crews work Franklin Park every week, and we also cover Window Installation in Franklin Park plus the surrounding communities of Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you live near the Broward line or up toward the Hillsborough county edge, we will schedule the same crew, the same permit process, and the same warranty paperwork we bring to every Franklin Park job.
Serving Franklin Park, FL - Our Local Coverage Area
We’re based in the Franklin Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Franklin Park
Hillsborough County inspectors routinely flag surviving jalousie windows when any window or door permit is pulled on older CBS homes, even if those jalousies are not part of the original job scope. The reason is simple: jalousie louvered units are categorically non-compliant with current wind-load standards under Florida Building Code Section 1609, and the inspector’s job is to ensure the home’s openings meet code, not just the one you asked about. This is exactly what happened on a single-story rancher off NW 79th Avenue. We were replacing a row of failed jalousies with impact-rated double hung units, the inspector noticed the original louvered units on the back bedroom while the permit was open, and we widened the scope to bring every opening into compliance before final sign-off. If you are planning any window work in Franklin Park, budget for a whole-house opening audit. Call (954) 280-4413 and we will walk the permit path with you from the first measurement.
Yes, for any window or door replacement that requires a permit, Franklin Park falls within Hillsborough County’s designated wind-borne debris region, and Florida Building Code Section 1609 mandates impact-resistant glazing or approved opening protections. Your alternatives are impact-rated glass or a code-approved shutter or panel system that you actually install and maintain. Most Franklin Park homeowners choose impact glass because shutters are heavy, awkward, and easy to skip in an evacuation rush. We quote impact-rated products from Andersen, ES Windows, and ECO Window Systems side by side so you can see the cost difference between a mid-grade impact window and a premium laminated unit. Call (954) 280-4413 for a written quote on your specific openings.
You cannot match a jalousie exactly with a code-compliant unit, because the louvered design itself cannot meet current wind-load standards. What we can do is preserve the opening proportions and the ventilation feel. For bedroom openings, a double hung gives you top and bottom ventilation that feels similar to a jalousie. For utility rooms and baths, an awning window gives you that outward-opening airflow without the louver hardware. We will show you the operable options that fit your existing rough opening and tell you plainly when an opening is too narrow for a double hung without reframing. Call (954) 280-4413 and we will bring samples to your Franklin Park home.
Replacing non-compliant jalousie and single-pane aluminum windows with impact-rated units gives your insurer documentation that your home’s openings meet current Florida Building Code wind-load requirements. That documentation matters at renewal time and after a claim. Without it, an insurer may apply a higher hurricane deductible or challenge a claim for water intrusion through an opening that was never brought into compliance. We register both warranty layers in writing and provide the permit and inspection sign-off for every install, so you have the paper trail your carrier will want. Call (954) 280-4413 to schedule a free estimate and we will explain what documentation you should expect from any window contractor in Franklin Park.
A compliant quote for Franklin Park includes the permit, the design pressure rating for each opening, the impact-rated glass spec, the flashing and sill detail for a CBS rough opening, and both manufacturer warranty layers registered in writing. A cheap quote skips the permit, quotes non-impact glass, omits flashing tape, and leaves you holding a red-tagged inspection and a voided warranty. The cheapest bid in Franklin Park is not the one that costs less on paper. It is the one that costs more when the inspector flags the surviving jalousies and you are paying for a second install. Call (954) 280-4413 for a fixed-price, line-item quote that includes everything the county will check.
Get the Job Done Right in Franklin Park
If your Franklin Park home still has original jalousie or single-pane aluminum windows, the question is not whether they will need replacement. It is whether the replacement gets done to Hillsborough County code with the warranty paper to prove it. We have been doing this work long enough to know what the inspector will flag, what the insurance carrier will ask for, and what a Franklin Park ranch home needs to stay tight in a named storm. Call (954) 280-4413 to schedule your free estimate. We will measure every opening twice, quote the right product for each one, and put it all on paper before the truck leaves your driveway.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Franklin Park and surrounding communities since 2008 through a second-generation glazier’s craft tradition.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.