Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Palm Springs, FL | TruePane Windows & Doors
We provide independent CGI window and door service across Palm Springs, Florida. If you own a mid-century CBS home here, you already know the village’s building department cross-checks permits in ways neighboring cities don’t. That means a simple window swap often becomes a full-frame CGI impact project. Call (954) 280-4413 for a free estimate, and we’ll tell you what your specific opening needs before anyone touches a frame.
TruePane has replaced original jalousie and single-pane aluminum windows in this village for years. We know CGI’s Windows, Doors, and Sliding Glass Lines the way a mechanic knows a particular engine family. And we’re independent. We don’t answer to CGI. We answer to the homeowner standing in front of us.
Why Palm Springs Residents Choose Us for CGI Service
Palm Springs is not West Palm Beach. The housing stock is older, the openings are standard 6’8″ but battered by sixty years of humidity, and the village runs its own building department with its own inspection habits. We’ve learned those habits. Dale Kessler, our owner, spent his early years watching his father reseal jalousie windows in Fort Lauderdale and learned the fundamentals at McFatter Technical College in Davie. He’s been putting impact-rated units into South Florida coastal homes ever since. The rule he keeps on the whiteboard applies to every CGI job we take in Palm Springs: if it is not right on paper, it will not be right on the wall.
We show up in uniform, background-checked. We measure every opening twice. We register both manufacturer warranty layers in writing before we leave the driveway. And we’ve been serving communities since 2008, so we’re not going anywhere.
Common CGI Windows & Doors Problems We Solve in Palm Springs
- Oxide-driven frame weld cracking at jalousie-to-CGI conversion points. Palm Springs humidity works on old aluminum residue left behind when original jalousies come out. That residual corrosion creeps into the new frame’s weld points if the openings aren’t cleaned and re-flashed properly. We see it on conversions that were rushed. We don’t rush them.
- IG unit seal delamination from rapid thermal cycling. Single-story CBS homes with low-pitch roofs take brutal afternoon sun. The glass heats fast, cools fast, and the insulating glass seals fail faster than in coastal towns with more shade coverage. On CGI Estate fixed and picture windows, that shows up as fog between panes.
- Roller and track pitting on original CGI Sentinel sliding doors. If the door was installed decades ago without stainless hardware, the humid air pitted the rollers and scored the track. The door still slides, but it grinds. The fix is usually replacement rollers and a track evaluation, not a whole new door.
- Latch-side extrusion stress fractures on double-hungs. CBS homes in Palm Springs flex slightly during pressure cycling from summer storms. That repeated stress lands on the latch-side extrusion of double-hung units. We catch the hairline cracks before they become sash failures.
- Non-impact glass flagged during unrelated permit work. This is the big one here. A roof permit or an addition trigger gets the village inspector walking the property. Original aluminum single-panes and jalousies get flagged. The homeowner didn’t plan a window replacement, but now it’s mandatory.
CGI Service in Palm Springs: What Local Conditions Mean for Your Equipment
Palm Springs sits roughly 12 miles inland from the Atlantic, which means design wind speeds around 140 to 150 mph under ASCE 7. The village’s housing stock is almost entirely single-story CBS ranch homes built between 1955 and 1975. Many still carry original louvered jalousie windows, and those are entirely non-compliant with Florida Building Code wind-load requirements. They cannot be made hurricane-resistant. The only real fix is full-frame impact window replacement.
What makes Palm Springs genuinely different from neighboring West Palm Beach or Lake Worth is the village’s own municipal building department. Inspectors here cross-check old permits during any structural renovation. A homeowner pulls a roof permit, and the inspector notices jalousies that were swapped years ago for non-impact units without a permit. The window job gets added to the scope, and the homeowner is on a deadline. Contractors in West Palm Beach don’t see this at the same rate. We do, and we know how to walk a homeowner through the direct building official inspection that Palm Springs requires.
Last June, our crew replaced a row of five original aluminum jalousie windows with CGI Estate fixed-impact units on Davis Road. The homeowner had pulled a roof permit, and the Palm Springs inspector noted the non-compliant jalousies. We handled full-frame replacement, re-flashed the CBS openings, and the job passed impact inspection the same week.
CGI Models & Products We Service in Palm Springs
We service the full CGI residential line, including the CGI Sentinel Sliding Glass Door, CGI Estate Casement Window, CGI Estate Fixed & Picture Window, and CGI Estate Single Hung Window. For replacements, we insist on OEM glass units and rollers to maintain NOA wind-load compliance. For hardware, we use marine-grade aftermarket screws, hinges, and seals where the original parts corrode in Palm Springs humidity or are no longer available. We never patch a failed CGI impact unit unless the frame is sound. Full sash or entire unit replacement usually costs less over time than repeated seal repairs. For more context on the broader CGI line and how it performs in South Florida, see our CGI sales & service page.
CGI Service Pricing in Palm Springs
CGI service pricing in Palm Springs typically runs $180 to $340 for common repairs like roller replacement or seal work. Full-frame impact window replacement starts around $1,400 per opening and climbs based on size and structural condition. Door work lands between $500 and $2,200 depending on whether we’re replacing hardware or the entire unit.
A few things drive cost in Palm Springs specifically. CBS construction means every full-frame replacement requires re-flashing concrete openings, which adds labor. The village’s permit cross-checking can expand scope, and that changes the bid. Our free estimate includes a written line-item quote with both warranty layers registered in writing. Call (954) 280-4413 to schedule yours.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Palm Springs
Because the original aluminum or jalousie frames in mid-century CBS homes were never built to carry impact-rated glass. An insert leaves the old frame in place, and that frame will not pass a Palm Springs wind-load inspection. Full-frame replacement removes the weak point entirely. Call (954) 280-4413 for an exact quote on your openings.
Yes, in most cases. Palm Springs enforces Florida Building Code wind-load requirements, and the village inspectors cross-check permits during unrelated work. One window replacement can trigger impact requirements for that opening, and sometimes the inspector flags other non-compliant units on the property. We can tell you what to expect before the inspector does.
No. A retrofit into an original 1960s aluminum frame compromises the unit’s NOA rating and will not pass a Palm Springs inspection. The frame is part of the impact system. Full-frame replacement is faster than fighting a failed inspection. Call us for a written quote.
Usually not. Pitted rollers on a CGI Sentinel are a common Palm Springs issue, and replacement rollers with marine-grade hardware often fix the problem. We evaluate the track condition before recommending any replacement. Estimates are free: (954) 280-4413.
The village can flag the unpermitted work during any subsequent inspection, and the homeowner becomes responsible for bringing the units up to code. That often means replacement rather than repair. We’ve helped many Palm Springs homeowners resolve exactly this, including direct building official inspections. Call us to review your situation.
Service Areas Near Palm Springs
We serve Palm Springs and the surrounding communities across central Palm Beach County. If you’re nearby, our service area extends to West Palm Beach, Lake Worth Beach, Greenacres, and Atlantis. You can review our full Palm Springs service area coverage, or see our dedicated pages for CGI service in Parkland and CGI service in Pembroke Park.
Book Your CGI Service in Palm Springs Today
Call (954) 280-4413 to schedule a free estimate for your CGI windows or doors in Palm Springs. We’ll measure, quote on paper, and register the warranties before the truck leaves. A live person answers, day or night.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Springs and South Florida since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.