Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ES Windows Windows & Doors in Palm Springs, FL | TruePane Windows & Doors
We provide independent ES Windows service, repair, and full-frame replacement across Palm Springs, FL. Our crews work on ES Thermal, Impact, EuroLine, and Classic series units in the village’s CBS ranch homes every month. The difference here is that most ES Windows work in Palm Springs starts with a code-compliance audit before any glass gets ordered, because the village runs its own building department and its inspectors cross-check permits on unrelated work. Call (954) 280-4413 and we’ll walk you through what your home actually needs.
Why Palm Springs Residents Choose Us for ES Windows Service
We’ve been working on ES Windows aluminum and aluminum-clad units in Palm Beach County concrete block homes for decades. Dale Kessler, our owner, grew up in Sailboat Bend in Fort Lauderdale and trained at McFatter Technical College in Davie before spending twenty years cutting and setting glass along South Florida’s coastal corridor. He knows which ES series hold up to this climate and which ones don’t, because he’s pulled enough of them out of block openings to see exactly where they fail.
We’re independent. We’re not manufacturer-affiliated, and we don’t carry a line card that pushes one brand over another. That independence matters in Palm Springs, where the building department’s rules and the wind zone ratings dictate what goes back into the wall. Our techs measure every opening twice. We register both warranty layers in writing before the truck leaves your driveway, and if the install isn’t done right, our Done Right Promise means we fix it without paperwork or arguing. We stand behind it.
We’re also here for the long run. Over years serving local communities, a good portion of that in Palm Beach County. A live person answers our phone 24/7, not a voicemail tree.
Common ES Windows Windows & Doors Problems We Solve in Palm Springs
- Fogged or failed insulated glass units (IGUs). Palm Springs humidity sits high year-round, and ES units from the 1990s and 2000s often show interior fog between the panes within six to eight years. The seal delaminates and once moisture gets in, the glass has to be replaced or the whole sash rebuilt.
- Aluminum frame oxidation on south-facing walls. We regularly open up ES frames on Congress Avenue and Greenbriar Drive homes where the original jalousie retrofit was never water-sealed at the rough opening. Decades of condensation and storm-driven rain against raw block causes the aluminum to pit and powder.
- Corroded rollers and tracks on ES sliding doors. Sand and salt-laden air from the Atlantic, roughly 12 miles east, works its way into rollers. Doors start to drag, then bind, then stop moving. We’ve pulled tracks on Lake Worth Road that had essentially welded themselves shut.
- Thermal clip and corner joint failure. Older ES Thermal units, especially from the 1970s, lose their corner clips under Palm Springs’ combined heat and rain. The frame starts to rack, the sash won’t seat square, and air leaks in.
- Non-impact ES windows flagged by the Village of Palm Springs. If a previous owner swapped jalousies for standard ES units without a permit, a roof permit or addition trigger can bring an inspector who flags the windows. We see this constantly. Full-frame impact replacement is the fix.
ES Windows Service in Palm Springs: What Local Conditions Mean for Your Equipment
Palm Springs, FL sits roughly 12 miles inland from the Atlantic, but it still falls under design wind speeds around 140 to 150 mph under ASCE 7. That’s real hurricane territory, even without a direct coastal exposure. The village’s housing stock is almost entirely single-story CBS ranch homes built between 1955 and 1975, with original aluminum single-pane or jalousie windows. Those jalousies are non-compliant with Florida Building Code wind-load requirements, period. They cannot be made hurricane-resistant. So when an ES Windows service call turns into a replacement job here, it’s almost always a full-frame replacement, not a retrofit or insert.
Here’s the part that sets Palm Springs apart. The Village of Palm Springs runs its own municipal building department. Its inspectors cross-check permits on unrelated work. If you pull a roof permit and the inspector sees ES windows that were installed without a permit years ago, you can get a stop-work order on the whole job. That’s why our ES jobs in Palm Springs begin with a code-compliance audit before any glass is ordered. We check what’s installed, what’s permitted, and what needs to change to satisfy the village and the wind zone. If it is not right on paper, it will not be right on the wall.
ES Windows Models & Products We Service in Palm Springs
We service the full ES Windows line that shows up in Palm Springs homes: the ES Thermal Series aluminum thermally broken windows, the ES Impact Series casements and sliders with Miami-Dade NOA ratings, the ES EuroLine tilt-turn and fixed windows, and the ES Classic Series single-hung and picture windows. For parts, we use genuine ES Windows hardware and gaskets where they’re still available from our stock. For discontinued lines, we turn to certified equivalent seals and rollers. And we’ll tell you straight when a rusted ES frame is cheaper to replace than rebuild. That’s the honest answer, and in Palm Springs it’s the answer that saves you money.
ES Windows Service Pricing in Palm Springs
ES Windows service pricing in Palm Springs depends on what the unit needs. A roller replacement on an ES sliding door typically runs $180 to $320. A failed IGU replacement with new glass runs $350 to $750 per sash. Full-frame ES Impact Series replacement in a CBS block opening, which is what most Palm Springs code-driven jobs require, runs $900 to $2,400 per opening depending on size, series, and what the rough opening looks like when we open it up. Our estimates are free, written, and line-itemed, and they include the code-compliance review specific to the Village of Palm Springs. Call (954) 280-4413 for an exact quote.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - ES Windows Windows & Doors in Palm Springs
Yes. The Village of Palm Springs runs its own building department, and window and door replacement requires village permitting on top of any county-level approval. We handle that paperwork as part of the job. Call (954) 280-4413 and we’ll tell you exactly what your project triggers.
In many cases, yes, the rubber gasket or glazing bead can be replaced without pulling the entire sash. But if the IGU seal has already failed and there’s fog between the panes, the glass unit itself needs replacement. We’ll inspect the window and tell you which situation you have before quoting anything.
Because the Village of Palm Springs cross-checks permits on unrelated work. If a roof permit, addition, or other inspection shows windows that were installed without a permit, the inspector can flag them, especially if they’re non-impact units in a wind-borne debris zone. The fix is typically full-frame impact-rated replacement. We do that work regularly and pull the permits for you.
Sometimes. If the track pitting is shallow and the rollers are the main problem, we can replace rollers and clean up the track. If the aluminum has corroded to the point where the frame is losing its structural seat, replacement is usually cheaper in the long run. We’ll give you both numbers on paper so you can decide. Estimates are free; call (954) 280-4413.
Usually yes. We fit full-frame ES casements into the existing CBS block opening without cutting new block, which preserves the structure. The work involves squaring the rough opening, flashing it correctly, and sealing against the block. That’s standard for the 1950s and 1960s homes we work in across Palm Springs.
Service Areas Near Palm Springs
We serve Palm Springs and the surrounding neighborhoods, including Acacia Villas, Apollo Beach, and the broader Palm Beach County area. If you’re in a neighboring community and need ES Windows service in Parkland or ES Windows service in Pembroke Park, our crews cover those territories as well. For the full picture, see our Palm Springs service area page.
Book Your ES Windows Service in Palm Springs Today
If your ES Windows need service in Palm Springs, call (954) 280-4413. We’ll send a background-checked, uniformed technician who measures twice, quotes on paper, and registers both warranty layers before the truck leaves your driveway. For ES Windows sales & service, we’re the independent local team that handles the village’s permit reality the right way.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Springs, FL since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After