Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Surfside
Door installation in Surfside comes with a set of rules most door companies never mention until the wall is open. We do. A direct answer up front: a standard entry door replacement in a Surfside condo runs roughly $2,400-$4,800 installed, a storm door $1,600-$3,200, and a custom or arched door $5,500-$12,000 depending on size and the condition of the concrete opening behind it. That last part is what separates a door that closes square from one that binds in July. TruePane Windows & Doors has been working Surfside’s 1960s and 1970s concrete condominiums long enough to know what hiding behind the old jamb, and we price for it before the first screw comes out. Call (954) 280-4413 and we’ll walk the building with you, measure twice, and put the real number in writing.
Why TruePane Windows & Doors Is Surfside’s Preferred Door Installation Company
Surfside is not like the rest of Miami-Dade. It is a narrow barrier island with salt air on three sides, and the building stock is almost entirely mid-rise concrete condominiums from the 1960s through the 1980s. The doors in those buildings were installed when Miami-Dade had no high-velocity hurricane zone code. That means every replacement we touch carries a Miami-Dade Notice of Acceptance, or NOA, and the framing behind the old door usually needs work before the new unit goes in. We know that before we quote. A lot of companies learn it after they’ve already cut the door out.
Dale Kessler founded TruePane in 2008 as a second-generation glazier, and the rule on his whiteboard has not changed: if the pane is not true, the job is not done. That applies to the jamb, the header, the sill pan, and every screw holding the frame to the concrete. Our crews are background-checked and uniformed, and the technician who measures your door is the same one who installs it. Surfside boards and unit owners tell us the same thing: they want a company that answers the phone and stands behind the work. A live person answers our line 24 hours a day. We stand behind every install with the Done Right Promise, and we register both manufacturer warranty layers in writing before the truck leaves the driveway. That is The Keystone Standard, and we put it on every invoice.
Our Door Installation Services in Surfside
We install and replace doors across the full range of what Surfside’s buildings actually need. Below are the four we handle most often on the island. If you need something else, ask. We’re not in the business of turning away work we can do right.
Storm Doors
Storm doors in Surfside are not decorative extras. They are the first line against wind-driven salt spray, and they have to carry a Miami-Dade NOA for impact resistance. We set storm doors on fusion-welded steel frames, not the thin aluminum channel that original doors often sit in. That matters when the recertification inspector comes through with a checklist. On a condo line off Collins Avenue, our crew pulled a corroded original entry door and found the jamb had spalled behind the hinge screws, a classic salt-spray failure. We cut back to sound concrete, flashed the rough opening with tape, set a new NOA-rated storm door, and the unit passed its recertification inspection first pass. That is the standard we work to, because that is the standard Surfside now enforces.

Entry & Swing Doors
Entry doors in Surfside’s concrete buildings rarely sit in a clean opening. The original steel fasteners corrode in the salt air, and the concrete around the hinge screws cracks and spalls. We rebuild the substrate before we hang the door. That means cutting back loose concrete, treating the steel, packing the void, and setting new anchors that will hold for decades. Most Surfside entry door replacements we do range from $2,400 to $4,800 depending on door size, hardware, and how much concrete work the opening needs. A board that approves only the cheapest bid usually calls us back a year later when the new door has pulled loose from the same spalled jamb.

Double & French Doors
Double doors and French doors in Surfside show the same failure mode, multiplied across two hingside jambs. When one panel sags, the other binds at the astragal, and the salt air has already started working on whatever fasteners were left exposed. We install double and French doors with continuous head flashings, full-perimeter sill pans, and hinges sized for the extra weight. On older concrete frames, we check the header before quoting. Many 1960s-era headers were built for a single lightweight aluminum door, not the double impact-rated unit the current code requires. If the header is undersized, we tell you before the door is ordered, not after it’s leaning against the hall wall.

Pivot Doors
Pivot doors are increasingly requested in Surfside’s higher-end condo renovations. They are heavy, often eight feet tall or more, and they exert forces a standard hinge never does. In a concrete building, the pivot mount at the floor and the top carrier at the header both need solid anchors into sound substrate. Salt-damaged concrete will not hold a pivot under wind load. We have installed pivot doors in Surfside units where the original opening had to be re-engineered before the door could be ordered. That is not a surprise we spring on anyone. It is in the quote, on a line item, approved in writing before work starts.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Surfside
TruePane is an authorized installer for more than a dozen manufacturer lines, so we are not pushing one brand on every opening. For Surfside’s salt-corrosion conditions and NOA requirements, we commonly specify Andersen for entry doors, ES Windows for high-exposure oceanfront lines, and ECO Window Systems when a board wants a value-engineered impact door that still carries a full NOA. We quote manufacturers side by side on paper so a Surfside board or unit owner sees exactly what they are paying for, not a verbal summary. We stock common replacement hardware for the door brands already installed across Surfside’s condo inventory, which means some repairs get done the same week rather than waiting on a distributor.
Common Door Installation Problems We See in Surfside Homes
- Spalled concrete jambs behind hinge screws. Salt spray penetrates the original aluminum frame, corrodes the steel fasteners, and the expanding rust cracks the concrete around every screw. The new door may look fine for six months, then start sagging. We rebuild the substrate before we install.
- Building-wide recertification scopes. When a milestone inspection flags one original door as non-impact, the engineer’s report often puts every original door on that line in scope. Boards call us for one unit and end up needing a schedule across twenty. We handle both, and we sequence the work so occupied units are disturbed minimally.
- Undersized headers from the 1960s. Original concrete frames were poured for single-pane aluminum doors that weighed a third of what a modern impact-rated door weighs. Under wind load, those headers crack. We check header dimensions during the measure and flag them in writing if reinforcement is required.
- Failed sill pans and hidden water damage. A door that leaked for years before replacement has usually rotted or spalled the concrete at the sill. If we do not remove that damage and re-flash the opening, the new door inherits the old leak. We cut out the bad substrate and install a full-perimeter sill pan on every exterior door.
Pricing for Door Installation in Surfside, FL
Here are the numbers Surfside owners ask us for, as of this season. Standard entry and swing door replacement: $2,400-$4,800. Storm door with NOA-rated frame: $1,600-$3,200. Double or French doors: $4,800-$9,500. Pivot doors: typically $7,000 and up depending on size and engineering. Arched and custom doors run $5,500-$12,000. What moves a quote within those ranges: the size of the opening, the condition of the concrete substrate, whether the header needs reinforcement, and the door manufacturer line the board approves. Every estimate is a written, line-item quote, not a lump sum. You will see exactly what each part costs. Call (954) 280-4413 and schedule a free measure and quote. No charge for the visit, and the number we give you is the number on the contract. If we find something when the wall is open, you approve the change in writing before we proceed. That is how The Keystone Standard works in practice.
We Also Serve Cities Near Surfside
TruePane runs crews into Surfside and the surrounding communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you own a unit or home in one of those areas and need Door Installation done to the same NOA and substrate-first standard, call the same number: (954) 280-4413. We coordinate our Door Installation in Surfside team from the South Florida metro office, so scheduling is straightforward and the crew arrives knowing what building they are walking into.
Serving Surfside, FL - Our Local Coverage Area
We’re based in the Surfside area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Surfside
Because the salt air has usually corroded the steel fasteners inside the original 1960s or 1970s concrete jamb, which spalls the concrete and leaves nothing solid for the new door anchors to bite into. We discover this during the measure, or confirm it once the old frame is out. The repair is a line item on the quote, approved before we touch it. Call (954) 280-4413 and we will inspect your opening and tell you exactly what is behind the old jamb before you commit to a door.
We write the allowance into the contract before we start, so you know the maximum you are approving for substrate repair, header reinforcement, or re-flashing. If the surprise is beyond the allowance, work stops on that opening and you get a written change order with photos. You approve or decline before we proceed. No one at TruePane decides to spend your money without your signature. That has been the rule since Dale Kessler opened the shop.
Yes. Surfside is inside the High-Velocity Hurricane Zone, and every exterior door on a residential building must carry a current Miami-Dade Notice of Acceptance for impact resistance. There is no exception for single-family homes or small condo lines. Non-impact doors are not a legal option here. We quote NOA-rated products exclusively, and we register the NOA documentation with the manufacturer warranty papers before we leave the site.
You can, but the engineer’s report will often pull every original door on the same line into scope once one is flagged. If the building is due for recertification this cycle, replacing one door now may mean paying twice when the rest of the line gets flagged next inspection. We advise boards and owners to treat the inspection report as the scope list. Call (954) 280-4413 if you want us to review the engineer’s door findings and give you a building-wide number, not just a per-unit number.
They get replaced with NOA-rated impact doors, typically as part of a building-wide remediation. We remove the old units, dispose of them, and document the replacement for the recertification file. The old door is not repairable into compliance. The new door gets both warranty layers registered in writing, and the work is covered by the Done Right Promise. Call (954) 280-4413 for a free measure and a written quote for your unit or your whole line.
If you own or manage a building in Surfside, the doors are not a question of if they need replacing. The question is whether the crew doing the work knows what is behind the old frame. We do. Call (954) 280-4413 to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Surfside with door installation and replacement since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After